Pre-Installation Steps:

1. Check Clearance: Ensure adequate space around the brakes, hubs, fenders, and suspension before fitting tires.

2. Return Policy: Please note, wheels that have been mounted are non-returnable.

​

Mounting Tires:

1. Use tools specifically designed for alloy wheels when mounting tires.

2. Avoid using any tools that could scratch, scuff, or damage the wheel’s surface, as doing so will void the warranty.

​

Wheel Adapters and Spacers:

1. We advise against using wheel adapters or spacers. Should they be used, the buyer assumes full responsibility and liability.

​

Balancing and Lug Nut Installation:

1. For balancing, use self-adhesive tape weights only. Clip-on weights are not recommended as they can damage the finish and void the warranty.

2. Ensure the correct type of lug nuts are used. Always follow the manufacturer’s recommended torque settings when tightening.

3. After driving 75–100 miles, recheck and torque the lug nuts.

​

Tire Pressure Monitoring Sensors (TPMS):

1. If your vehicle is equipped with TPMS, be sure to reinstall the sensors in the new wheels. Some sensors may require activation post-installation, so consult your vehicle’s manual for guidance.

Care & Maintenance for Warrior Wheels

​

1. Routine Cleaning: Clean your wheels regularly to preserve their pristine appearance and glossy finish.

​

2. Avoid Heat: Do not clean your wheels while they are still hot to prevent damage.

​

3. Cleaning Agents: Use water with a gentle, non-abrasive cleaner. Avoid using any harsh chemicals that could be harmful to both your vehicle’s paint and the wheel surface.

​

4. Protective Layer: After cleaning, apply a non-abrasive car wax containing carnauba for added protection and enhanced shine.